Health & Safety Training
Health & Safety Training Experts
We are the experts in training and development; we have well-trained instructors who engage with the delegates on a level they are comfortable with, discussing everyday scenarios and putting our training into context, which makes for better retention of the knowledge we convey. Our training is based on the foundation of good governance by our accreditation requirements and is in line with the Health & Safety Act. All our training material is compiled using a modular competency system in line with the NQF, ensuring that adequate training is implemented.
Investigate workplace incidents
The purpose of the training and unit standard:
Learners credited with this unit standard will be able to demonstrate the ability to conduct investigations into workplace incidents. The competency includes all the activities required to successfully conduct incident investigations.
Legal liability
The purpose of the training and unit standard:
This unit standard covers the current occupational health and safety and mine health and safety regulations. Specified requirements include legal requirements and are contained in one or more of the following documents:
- Current mine health and safety legislation
- Current occupational health and safety legislation
If the task is recurrent, once the task has been signed-off, it will be automatically rescheduled in line with the task frequency that was defined when form was allocated.
HIRAC
The purpose of the training and unit standard:
Persons credited with this unit standard will be able to:
- Explain the legal and specified requirements for conducting continuous risk assessments.
- Prepare to conduct a continuous risk assessment.
- Conduct a continuous risk assessment.
- Initiate remedial action and follow up on Continuous Risk Assessment.
RCAT
The purpose of the training and unit standard:
Learners credited with this unit standard will be able to demonstrate the ability to conduct investigations into workplace incidents. The competency includes all the activities required to successfully conduct incident investigations.
Working at height
The purpose of the training and unit standard:
Learners wishing to acquire the competencies in this standard will be, people working at height where there is a risk of injury from a fall. Learners will be involved in performing tasks at height. Qualifying learners are able to follow fall arrest principles to perform work at height safely, under supervision of a qualified supervisor.
The qualifying learner is capable of:
- Explaining the use and limitations of a limited range of fall arrest equipment and fall arrest plan.
- Inspecting, assembling and storing fall arrest equipment.
- Selecting suitable anchor points.
- Using fall arrest systems with a double lanyard.
- Using pre-installed vertical and horizontal life-lines.
In order for a successful learner of this standard to be able to function in a rope access operation, the learner must:
Be medically fit and in possession of a medical certificate, declaring the learner free from a condition that may prevent the learner from working safely as specified in the range statement. (An example of the content of the medical certificate is available in SABS 0333:2 Annex A).
Forklift and other lifting Equipment training
Course | Unit Standard |
Operate counter balance lift truck / Forklift (Code F1 – 4) | 242974 |
Operate defined purpose lift trucks (F6, F7 & F12) PPT | 242981 |
Operate a Reach truck (Code F5, F8-9, F13-16) Bendi | 242972 |
Operate an Overhead gantry crane (Code 30) | 242976 |
Operate a Truck mounted crane | 242978 |
Operate Mobile elevating work platform (Code C53) MEWP | 243272 |
Operate an Order Picker Lift Truck | 242972 |
Operate Electronic Hoist – WINCH | 244407 |
Operate wall-mounted / pillar-mounted Jib Crane | 260758 |
Basic principles of Rigging & Slinging | 14706 |
Construction Equipment and other Construction training
Course | Unit Standard |
Scaffold Erector | 263245 |
Scaffold Inspect and access | 263205 |
Operate a Front-end Loader | 262747 |
Operate a Backhoe/Loader | 262727 |
Operate Grader | 262735 |
Operate a Rigid Body Dump Truck | 262731 |
Operate a Roller | 262805 |
Operate a Scraper | 262710 |
Operate a Skid Steer / BOBCAT | 262712 |
Operate Tracked Dozer | 262729 |
Operate Excavator | 262744 |
Confined spaces on site
The purpose of the training and unit standard:
Learners who are assessed as competent against this unit standard will be able to identify the hazard of confined spaces and the precautions required for the safety of the workers and public. This unit standard underpins the Elective Learning. It contributes to the development of a professional community of Construction workers. The contribution to The National Skills Development Strategy is the key development interface between learners and new competencies to be achieved. Its contribution to socio-economic transformation is that learners would be able to undergo RPL- assessment and thereby received recognition for previous learning and experience. The employability and career prospects of learners can therefore be enhanced by the qualification.
Hot work permit
The purpose of the training and unit standard:
This unit standard will enable the learner to describe the requirements applicable to a permit to work in terms of hot work; cold work; confined space entry and lockout systems in a work area.
Persons accredited with this unit standard will be able to:
- Describe the requirements for hot and cold work permits.
- Describe the requirements to apply a lock-out system.
- Describe the requirements to apply a confined space entry permit.
None Unit Standard Training
Course |
Job safety observation |
Safe use and inspection of basic hand tools |
Daily safety task instruction / Toolbox Talks |
Other health and safety training
Course | Unit Standard |
Control workplace hazards and risks – CWHR – HAZCHEM | 259624 |
Convey Dangerous Goods by road – DG | 123259 |
Safe use and inspection of Electrical Power Tools | 10255 |
Provide Risk Based primary emergency care / First Aid | 120496 |
Environmental Awareness | 12512 |
Ladder Inspector | 261664 |
Personal Protective Equipment Inspector | 116527 |
Introduction to Construction Regulations 2014 | 15136 |